Incredible Energy Saver Plan
Annual check-ups keeps your maintenance warranty in place!
Family Owned and Operated for over 30 years!
Plan Includes:
- Precisions Tune-Up For Air Conditioning / Furnance
- Combustion Analysis, Professional Cleaning , & Safety Inspection
- FREE Extended Repair Warranty (1 year on parts)
- FREE $39.50 Diagnostic Fee
- 10% off parts
20 Point Checklist
- Clean Burner Assembly to improve combustion, reducing waste heat
- Tune Burners for more efficient burns, saving energy
- Clean Ignition Assembly to ensure reliable operation on demand
- Clean & Inspect Furnace Heat Exchanger to ensure safe operation and the absence of cracks from metal fatigue
- Verify Flue Draft to ensure dangerous gas by-products are properly venting to the outdoors and flue pipes are free from obstruction
- Inspect Flue Pipe to ensure no corrosion is present which can lead to cracks and the introduction of dangerous fumes into your home
- Test Refrigerant Charge to ensure optimum levels leading to lower utility usage and extend compressor life
- Test Capacitors to ensure reliable operation and continued compressor and motor protection
- Test Crankcase Heaters to ensure proper compressor protection
- Inspect & Test Controls & Safeties to keep operating costs low and prevent failures. (Heat Pumps Only)
- Adjust Blower Fan Blower to provent wasted energy and excess sound levels from nuisance cycling
- Adjust Balancing Dampers to improve comfort. (Zoned Systems)
- Clean or Replace Filters to reduce energy use, reduce compressor strain, improve indoor air quality, and improve comfort
- Check Air Flow to ensure proper air flow across the coil for proper humidity removal and reliable operation
- Visually Inspect Ductwork to identify obvious leaks, which reduce system efficiency and increase utility expense
- Tighten Electrical Connections to ensure ininterrupted system opration
- Measure & Record Voltage & Amperage to identify baseline oprating conditions
- Clean Inside Evaporator Coil to restore heat transfer efficiency, reduce utility cost, and improve air quality
- Clean Outside Condensing Coil to restore heat transfer efficiency and reduce utility cost
- Clean Condensate Drains to prevent water damage and the potential for mold formation
